Chinese Version (中文网站)


Jig machine

Number of hits:times   Update time:2017-03-28 16:36:52
It belongs to gravity equipment. Widely used for separating gold ore, iron, tin, tungsten, coltan, diamond, barite, manganese, heavy minerals and so on.
1 / 6


1.Description of jig machine
Jig separator belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.
The device is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research.

2.Feature of jig machine
High capacity
High concentration ratio and high recovery
Fabricated with highest quality material
Easy to install, operate and maintain
Long working life
The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
Saving water 30-40% than ordinary jig
The pulsation speed very easy adjusted by regulator
Suitable for roughing and desliming
Can achieve a good result

3.Working Principle of jig machine
Jigs a kind of energy saving gravity equipment development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds.Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water.The ascending time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved.The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved.